Please note a separate plate will be needed for the older 950 models, please let us know at checkout in the comment box.
Save time by installing this Snap Out for your cubby so you can save time and access the airbox quickly that usually takes much longer. Put it this way, it actually installs itself! How? When you do the math, the time it takes to install it (about an hour) vs the time over your life that you will spend removing those 12 horrible bolts, fishing them out of the skid pan when dropped or lost, and the sheer aggravation taking that glove box off elicits, you will get back countless hours of time to enjoy your trip or just get filter maintenance done faster than you can get your helmet on.
Notes
- A 3/4" (20mm) drilled hole is required just in the middle of the bottom of the glove box. A cheap step drill is perfect.
- You can retain the glove box lock if you have one. (Later model Adventures)
- There is no visible change to the bike or the use of the glove box. It performs exactly the same after installation.
- The absolute key to on trail maintenance or troubleshooting.
- With a coin or screwdriver you can have your hands on the throttle bodies or carbs in a minute.
Installation instructions
